[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Native VLAN for Huawei MA5616 DSLAM
Dear Shahab,
Thank you for more information.
CCUB main board doesn?t support native-VLAN setting, only CCUE main board supports it, the version should be upgraded to R312 above.
Thank you,
Tina
From: Shahab Vahabzadeh [mailto:sh.vahabzadeh at gmail.com]
Sent: 2013?8?12? 0:51
To: Tina TSOU; Zharov Oleg; nanog
Cc: Georgi Genov
Subject: Re: Native VLAN for Huawei MA5616 DSLAM
Dear Tina,
Thanks for your reply,
I have done the same example you told but there is no native-vlan command inside interface eth 0/0.
here my configuration and version of device, maybe firmare does not support it.
MA5616#display current-configuration
[vlan-config]
<vlan-config>
vlan 2 smart
port vlan 2 0/0 0
MA5616#display board 0
-------------------------------------------------------------------------
SlotID BoardName Status SubType0 SubType1 Online/Offline
-------------------------------------------------------------------------
0 H831CCUB Active_normal EP1A ASDA
1 H835ADLE Auto_find
2 H835ADLE Auto_find
3 H835ADLE Auto_find
4 H835ADLE Auto_find
5 H831PDIA Normal
-------------------------------------------------------------------------
MA5616#display version
Command:
display version
VERSION : MA5616V800R308C01
PATCH : SPC200 SPH508 HP2108
PRODUCT : MA5616
Mainboard Running Area Information:
--------------------------------------------
Current Program Area : Area A
Current Data Area : Area A
Program Area A Version : MA5616V800R308C01
Program Area B Version : MA5616V800R308C01
Data Area A Version : MA5616V800R308C01
Data Area B Version : MA5616V800R308C01
--------------------------------------------
MA5616(config)#interface eth 0/0
MA5616(config-if-eth-0/0)#?
---------------------------------------------
Command of eth Mode:
---------------------------------------------
auto-neg Enable/Disable port negotiation
combo-mode Switch working mode of COMBO port
display Display information
duplex Set duplex
flow-control Support flow control
line Line test
mdi Line-adaptive function
mirror Add mirror
network-role Network role
port Set TX optical power threshold
quit Exit from current mode and enter prior mode
reset Clear port statistics
return Enter the privileged mode
shutdown Deactivate port
speed Rate
switch Switch language mode
traffic-suppress Set port traffic suppression
undo Negate a command or set its defaults
Thanks
On Mon, Aug 12, 2013 at 5:51 AM, Tina TSOU <Tina.Tsou.Zouting at huawei.com<mailto:Tina.Tsou.Zouting at huawei.com>> wrote:
Dear all,
Only for the uplink GE, the native VLAN can be configured, it can not be configured for NNI EPON/GPON and UNI DSL port.
//if the uplink port is GE, then configure a new VLAN 2
huawei(config)#vlan 2
//add the uplink GE 0/0 0 to VLAN 2
huawei(config)#port vlan 2 0/0 0
//change to uplink card interface view
huawei(config)#interface eth 0/0
//change native vlan of uplink GE to 2
huawei(config-if-eth-0/0)#native-vlan 0 vlan 2
Thank you,
Tina
On Aug 11, 2013, at 6:44 AM, "Shahab Vahabzadeh" <sh.vahabzadeh at gmail.com<mailto:sh.vahabzadeh at gmail.com>> wrote:
> Only these interface's are available under:
>
> MA5616(config)# interface ?
>> adsl
>> emu
>> eponnni
>> eth
>> gponnni
>> h248
>> loopback
>> meth
>> null
>> shl
>> vdsl
>> vlanif
>
>
> Thanks
>
>
> On Sun, Aug 11, 2013 at 4:55 PM, Shahab Vahabzadeh
> <sh.vahabzadeh at gmail.com<mailto:sh.vahabzadeh at gmail.com>>wrote:
>
>> Dear Georgi,
>> MA5616 does not have any SCU interface...
>> What can we do?
>>
>>
>> On Sun, Aug 11, 2013 at 4:17 PM, Georgi Genov <linuxloader at gmail.com<mailto:linuxloader at gmail.com>>wrote:
>>
>>> It`s configurable under scu/scuh/giu board
>>>
>>> interface scu 0/9
>>> native-vlan 1 vlan XXXX
>>> native-vlan 2 vlan YYYY
>>> or
>>> interface giu 0/19
>>> native-vlan 1 vlan XXXX
>>> native-vlan 2 vlan YYYY
>>>
>>> On 11.8.2013 ?. 09:33 ?., Shahab Vahabzadeh wrote:
>>>
>>>> Dear Friends,
>>>> Anybody have idea about changing native vlan on Huawei MA5616 DSLAM?
>>>> I can not find the correct syntax, there is no option under "interface
>>>> eth
>>>> 0/0"
>>>> Thanks
>>
>>
>> --
>> Regards,
>> Shahab Vahabzadeh, Network Engineer and System Administrator
>>
>> Cell Phone: +1 (415) 871 0742
>> PGP Key Fingerprint = 8E34 B335 D702 0CA7 5A81 C2EE 76A2 46C2 5367 BF90
>
>
>
> --
> Regards,
> Shahab Vahabzadeh, Network Engineer and System Administrator
>
> Cell Phone: +1 (415) 871 0742
> PGP Key Fingerprint = 8E34 B335 D702 0CA7 5A81 C2EE 76A2 46C2 5367 BF90
--
Regards,
Shahab Vahabzadeh, Network Engineer and System Administrator
Cell Phone: +1 (415) 871 0742
PGP Key Fingerprint = 8E34 B335 D702 0CA7 5A81 C2EE 76A2 46C2 5367 BF90