[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Access hardware for small FTTP deployment
- Subject: Access hardware for small FTTP deployment
- From: geoffk at geoffk.org (Geoffrey Keating)
- Date: 16 May 2014 16:41:46 -0700
- In-reply-to: <CADsz48qmOf3dwRsah=H_xLznkf_pM0G_s0-CThAV7FgfxDfBBw@mail.gmail.com>
- References: <CADsz48qmOf3dwRsah=H_xLznkf_pM0G_s0-CThAV7FgfxDfBBw@mail.gmail.com>
Chris <hs.citizen at gmail.com> writes:
> I'm interested to see what other people are doing for these types of small
> setups. Does anyone know of any other reasonably priced access switches,
> 32+ SFP ports, and able to withstand 60degC or higher operating temperature?
An alternative you might consider is a small A/C unit, especially if
high temperatures aren't common where you are. Around here it's rare
to see a roadside cabinet without one.
Depending on where you are you might also find you need heat, since
it's even harder to find components specified for below-freezing than
for high temperatures. (I was also reminded that heat is helpful if
your equipment will occasionally be powered down or under a light
load, because as it cools down there can be condensation.)