I recommend dslreports.com/speedtest these days (was Speedtest.net not accessible in Chrome due to deceptive ads)

[eric-list at truenet.com (Eric Tykwinski)]

Jim,

No problems, I just knew you were one of the project founders.  I found it on the website shortly after posting.
My google-fu wasn?t up to par.
https://www.bufferbloat.net/projects/cerowrt/wiki/Tests_for_Bufferbloat/

I?m assuming I used the script last time for netperf, but have downloaded Flent to give it a shot.

Sincerely,

Eric Tykwinski
TrueNet, Inc.
P: 610-429-8300
__________________________________________________________________________________________
From: gettysjim at gmail.com [mailto:gettysjim at gmail.com] On Behalf Of Jim Gettys
Sent: Friday, July 22, 2016 3:23 PM
To: Eric Tykwinski
Cc: nanog list; jb; Toke H?iland-J?rgensen; Dave Taht
Subject: Re: I recommend dslreports.com/speedtest these days (was Speedtest.net not accessible in Chrome due to deceptive ads)

I don't read this list continually, but do archive it; your note was flagged for me to comment on.

On Thu, Jul 21, 2016 at 8:11 PM, Eric Tykwinski <eric-list at truenet.com> wrote:
This is probably for Jim Gettys directly, but I?m sure most others have input.  I could of sworn that that there was some test made to detect it directly on switches and routers?  Sort of like iperf, but to test bufferbloat specifically given the OS stack which is going to have issues as well, as shown on bufferbloat.net <http://bufferbloat.net/>.

?We recommend Toke H?iland-J?rgensen's
?
 "flent" ?
 
?https://flent.org/ for testing connections/devices/gear. It uses "netperf" transfers to load the link (by default with 4 simultaneous TCP connections in both directions, IIRC), and then runs another test (by default "ping") at the same time to test the connection under load. 
Turning on a netperf server is just as easy as turning on an iperf server (and the results are better, and netperf's maintainer responsive).?

See the documentation/paper on Toke's web site.  The "RRUL" test 
("Real-Time Response Under Load") is the one we use most/is best shaken down.   I'm sure Toke would love help with other tests.
?

Gives you lots of useful graphs, will do diffserv marking, etc...?