[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Switch for SFP+
- Subject: Switch for SFP+
- From: mehmet at akcin.net (Mehmet Akcin)
- Date: Wed, 13 May 2020 21:08:23 -0700
- In-reply-to: <[email protected]>
- References: <CA+LTh5VEWyKYNkQv7-2V+f9ojvtMRXzA6ptJzEiC4WOR1CEy=Q@mail.gmail.com> <[email protected]>
Used Juniper QFX5100-48T will do it. Probably overkill but you can grab one
cheap @ebay
On Wed, May 13, 2020 at 16:36 Mauro Gasparini <mjgasparini at gmail.com> wrote:
> Good afternoon.
>
> I'm looking for a switch with the following capabilities:
> . transport for more than 20 gbps
> . link aggregation LACP
> . slots for SFP+
> . seamlessly when trunking vlans through the link aggregation.
>
> And essentially that doesn't exceed US$D 2000 and is compatible with
> 10GBASE-ER and/or 10GBASE-ZR modules that are not from the vendor itself
> (e.g. SPFs: Huawei, Mikrotik, Sumitomo, OEMs).
>
> If any of you have a good experience with a device that meets these
> requirements (which are minimal with the exception of price and
> compatibility) ?
>
> Regards.
> Mauro Gasparini
>
--
Mehmet
+1-424-298-1903
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20200513/f6dc3e5e/attachment.html>