[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Switch for SFP+
- Subject: Switch for SFP+
- From: nathanb at sswireless.net (nathanb at sswireless.net)
- Date: Thu, 14 May 2020 13:36:24 -0600
- In-reply-to: <[email protected]>
- References: <CA+LTh5VEWyKYNkQv7-2V+f9ojvtMRXzA6ptJzEiC4WOR1CEy=Q@mail.gmail.com> <[email protected]> <CA+LTh5U_9mCZA=FtZ42-eXOF5EY96kv=MoeHXSfkmESRTGrGzA@mail.gmail.com> <[email protected]>
https://mikrotik.com/product/crs312_4c_8xg_rm
Regards,
Nathan Babcock
President - Straight Shot Wireless
O: 575-208-7915
<http://www.sswireless.net/>
From: NANOG <nanog-bounces at nanog.org> On Behalf Of Mauro Gasparini
Sent: Thursday, May 14, 2020 7:46 AM
To: Mehmet Akcin <mehmet at akcin.net>
Cc: nanog <nanog at nanog.org>
Subject: Re: Switch for SFP+
Thank you. The problem is that to get a price lower than U$D 3000 I have to resort to a used device.
El 14/5/20 a las 01:08, Mehmet Akcin escribió:
Used Juniper QFX5100-48T will do it. Probably overkill but you can grab one cheap @ebay
On Wed, May 13, 2020 at 16:36 Mauro Gasparini <mjgasparini at gmail.com <mailto:mjgasparini at gmail.com> > wrote:
Good afternoon.
I'm looking for a switch with the following capabilities:
. transport for more than 20 gbps
. link aggregation LACP
. slots for SFP+
. seamlessly when trunking vlans through the link aggregation.
And essentially that doesn't exceed US$D 2000 and is compatible with
10GBASE-ER and/or 10GBASE-ZR modules that are not from the vendor itself
(e.g. SPFs: Huawei, Mikrotik, Sumitomo, OEMs).
If any of you have a good experience with a device that meets these
requirements (which are minimal with the exception of price and
compatibility) ?
Regards.
Mauro Gasparini
--
Mehmet
+1-424-298-1903
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20200514/53919d36/attachment.html>