Switch for SFP+

[ahebert at pubnix.net (Alain Hebert)]

 Â Â Â  Hi,

 Â Â Â  Mikrotik is a decent product and I'm always amazed at their 
features set, but...

 Â Â Â  Using the UI to configuring the switch will punt too much traffic 
toward the CPU.  However, it is possible to configure the switch fabric 
with the cli and attain the desired results.

 Â Â Â  It does not compare to a JNP QFX5100 or a Extreme Network x650, 
x670...  etc.

-----
Alain Hebert                                ahebert at pubnix.net
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770     Beaconsfield, Quebec     H9W 6G7
Tel: 514-990-5911  http://www.pubnix.net    Fax: 514-990-9443

On 2020-05-14 15:11, Adam Thompson wrote:
>
> Have you actually looked at Mikrotik switches?  I don't like the OS, 
> but the hardware does what you want it to.
>
> https://mikrotik.com/products/group/switches?filter&s=c&r={%22sfp_plus_interface%22:{%22s%22:%223%22,%22e%22:%2224%22}}#!
>
> If necessary, buy your SFP modules from FS.com and get them coded as 
> Mikrotik modules at the factory - that's what we do for Cisco, 
> Brocade, Juniper, Extreme, etc.
>
> Even the top-of-the-line Mikrotik only costs US$899.
>
> -Adam
>
>
> *Adam Thompson*
> Consultant, Infrastructure Services
> [MERLIN LOGO]
> 100 - 135 Innovation Drive
> Winnipeg, MB, R3T 6A8
> (204) 977-6824 or 1-800-430-6404 (MB only)
> athompson at merlin.mb.ca <mailto:athompson at merlin.mb.ca>
> www.merlin.mb.ca <http://www.merlin.mb.ca/>
>
>
> ------------------------------------------------------------------------
> *From:* NANOG <nanog-bounces at nanog.org> on behalf of Mauro Gasparini 
> <mjgasparini at gmail.com>
> *Sent:* Thursday, May 14, 2020 8:46:21 AM
> *To:* Mehmet Akcin
> *Cc:* nanog
> *Subject:* Re: Switch for SFP+
> Thank you. The problem is that to get a price lower than U$D 3000 I 
> have to resort to a used device.
>
> El 14/5/20 a las 01:08, Mehmet Akcin escribió:
>> Used Juniper QFX5100-48T will do it. Probably overkill but you can 
>> grab one cheap @ebay
>>
>> On Wed, May 13, 2020 at 16:36 Mauro Gasparini <mjgasparini at gmail.com 
>> <mailto:mjgasparini at gmail.com>> wrote:
>>
>>     Good afternoon.
>>
>>     I'm looking for a switch with the following capabilities:
>>     . transport for more than 20 gbps
>>     . link aggregation LACP
>>     . slots for SFP+
>>     . seamlessly when trunking vlans through the link aggregation.
>>
>>     And essentially that doesn't exceed US$D 2000 and is compatible with
>>     10GBASE-ER and/or 10GBASE-ZR modules that are not from the vendor
>>     itself
>>     (e.g. SPFs: Huawei, Mikrotik, Sumitomo, OEMs).
>>
>>     If any of you have a good experience with a device that meets these
>>     requirements (which are minimal with the exception of price and
>>     compatibility) ?
>>
>>     Regards.
>>     Mauro Gasparini
>>
>> -- 
>> Mehmet
>> +1-424-298-1903
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nanog.org/pipermail/nanog/attachments/20200515/a8bcfa7b/attachment.html>